Quick Fit Tap-to-Shower Connector

Turn Your Tap Into a Shower or Hose Connection – No Plumber Required

The H20LOW Quick Fit Tap Aerator & Hose Connector lets you connect a standard shower hose to a compatible mixer tap in seconds — without replacing your tap or making permanent plumbing changes.

Simply remove your existing threaded tap aerator and fit the Quick Fit in its place. Once installed, it can stay fitted while you continue to use your tap normally.

Whenever you need a shower or hose connection, simply click the hose on — and disconnect it again when you’ve finished.

Perfect for hair washing, bathing children, pet washing, cleaning, caravans, motorhomes, boats and homes without a fitted shower.

What’s Included?

✓ 1 x H20LOW Quick Fit Tap Aerator & Hose Connector
✓ M28 male adaptor – pre-fitted
✓ M24 male fitting
✓ M22 female adaptor
✓ 1 x Tap Aerator Key

Shower hose and shower head are not included unless selected as add-ons.

Want the Complete Tap-to-Shower Setup?

Turn your Quick Fit into a complete handheld shower by adding:

+ 1.5m Grey Braided Shower Hose (if you need a longer hose, you can order two and a "hose to hose connector" part)

and your choice of:

+ 3-Spray Continuous-Flow Shower Head
A comfortable everyday shower head with three spray settings — ideal for hair washing, children and general bathing.

+ On/Off Trigger Shower Head
Control the water directly from the shower head — particularly useful for washing hair, bathing children, pets, cleaning, caravans and boats.

Want both shower heads?
Add both for maximum flexibility and switch between them whenever you need to.

Choose your add-ons above and the complete-pack saving will be applied automatically when you build the equivalent complete kit.

Prefer to buy everything together?

Shop the Complete Mixer Tap-to-Shower Conversion Kit →

The complete pack includes the Quick Fit + 1.5m shower hose + shower head + tap aerator key, with the bundle saving already included.

Will It Fit My Tap?

The Quick Fit is designed for mixer taps with a removable threaded aerator at the end of the spout.

The most common compatible sizes are:

✓ M28 male adaptor – pre-fitted
✓ M24 male fitting
✓ M22 female adaptor

Your existing tap aerator needs to unscrew from the end of your tap.

Please note: recessed or cache-style aerators are not normally compatible.

Not Sure If It Will Fit?

Send us a clear photo of the end of your tap and, if possible, your removed aerator.

We’re always happy to help check compatibility before you order.

Simple to Fit

1. Remove your existing tap aerator
Unscrew the aerator from the end of your mixer tap. The included tap aerator key can help with removal. Make sure you remove the existing rubber washer / gasket as it may still be left in the tap spout.

2. Choose the correct fitting
Use the fitting that matches the thread on your tap.

3. Fit your Quick Fit
Screw the Quick Fit securely into place. Additional rubber washers / gaskets are included, which you may need to use to achieve a watertight seal.

4. Use your tap normally
Your Quick Fit can remain fitted for normal everyday tap use. The aerator insert provides a straight, non-splashing water stream.

5. Click your hose on when you need it
Screw the hose connector onto the shower hose and simply connect to use the shower and disconnect it again when you’re finished.

One Quick Fit – Loads of Uses

The Quick Fit is a simple solution for:

✓ Turning a bath, basin or kitchen mixer tap into a handheld shower
✓ Washing and rinsing hair
✓ Bathing babies and children
✓ Washing dogs and other pets
✓ Rinsing baths, sinks and awkward areas
✓ Filling buckets and containers
✓ Caravans and motorhomes
✓ Boats and yachts
✓ Holiday lets and hotels
✓ Rental properties
✓ Homes where installing a permanent shower isn’t practical

No specialist plumbing is required — a simple, removable retrofit solution.

Important safety information – On/Off Trigger Shower Head

If you choose the On/Off Trigger Shower Head:

Do not use with electric showers.

For pumped shower systems, use only where the pump is specifically designed to switch off automatically whenever water flow is stopped at the handset, even briefly. The pump must not continue running against a closed handset, even for a short period. If you cannot confirm that the pump automatically stops as soon as the trigger closes the water flow, do not use this shower head with that system.

The trigger controls water flow only. It does not control or regulate water temperature. Water temperature may change while the flow is stopped, so always check the temperature before directing the water onto yourself, a child or a pet.

The trigger is intended only for temporary flow control while the shower head is in use. Do not leave the main tap, mixer or shower control running with the trigger closed for longer than necessary. Always turn the water off fully at the main control after use.

Compatibility depends on the complete tap, shower, pump and plumbing arrangement. If you are unsure whether your system is suitable, do not use the trigger shower head until compatibility has been confirmed.

💡 Not sure what thread your tap is? Click here to view our simple Tap Thread Size Guide.